Sunday, March 14, 2010

Sheer clamps are good !

Woke up today and confirmed that the sheer clamps had not ran off. They were steady and firmly in place where I left them yesterday :)
So I removed the screws and the small plywood tab I used on all joins, grabbed my eletrical planner set the blade to a medium depth and started shaving all of the excess out sticking out of the plywood edges, mainly towards the transom where that 45 degree was almost sticking straight up !
After 20 mns of loud noise, the sheer clamps were pretty smoothed and leveled. Next step.

No comments:

Post a Comment